Water dispersion paints and primers

For painting of dry rooms. Packaging options: 14 kg, 7 kg, 3 kg

Base
Concrete, cement and lime plaster, brick, gypsum board, wood. To obtain a more durable and lasting coating, as well as to reduce paint consumption, it is recommended to flatten the base with a «SinPro» primer.

Flow rate: 125-170 gr/sq.m. per layer depending on the state and structure of the surface.

Method of application
Mix thoroughly before use, dilute with water if necessary, but not more than 5% of the paint weight. The surface must be dry, stable, free of contaminants and oily or peeling coatings of paint of lacquer. Apply with brush, roller or coating pistol at t + 5 to + 30 degrees. When applied, clean the tool. Drying time is less than 6 hours. Intermediate drying of layers for 60 minutes.

Composition
Treated water, latex dispersion, titanium dioxide, finely dispersed filler, modifying and antiseptic supplements.
Base color: White

For painting of dry rooms and rooms with high humidity. Resistant to washing and wet evaporation. Packaging options: 14 kg, 7 kg, 3 kg

Base
Concrete, cement and lime plaster, brick, gypsum board, wood. To obtain a more durable and lasting coating, as well as to reduce paint consumption, it is recommended to flatten the base with a «SinPro» primer.

Flow rate: 125-170 gr/sq.m. per layer depending on the state and structure of the surface.

Method of application
Mix thoroughly before use, dilute with water if necessary, but not more than 5% of the paint weight. The surface must be dry, stable, free of contaminants and oily or peeling coatings of paint of lacquer. Apply with brush, roller or coating pistol at t + 5 to + 30 degrees. When applied, clean the tool. Drying time is less than 6 hours. Intermediate drying of layers for 60 minutes.

Composition
treated water, latex dispersion, titanium dioxide, finely dispersed filler, modifying and antiseptic supplements.
Base color: White

For painting of dry rooms and facades of buildings. Packaging options: 14 kg, 7 kg, 3 kg

Base
Concrete, cement and lime plaster, brick, gypsum board, wood. To obtain a more durable and lasting coating, as well as to reduce paint consumption, it is recommended to flatten the base with a «SinPro» primer.

Flow rate
Depends on the type, structure, state of absorbency of the colored surface, as well as the method of application. An approximate flow rate of 1 kg ./6-8 sq.m. in one layer depending on the state and structure of the surface.

Method of application
Mix thoroughly before use, dilute with water if necessary, but not more than 5% of the paint weight. The surface must be dry, stable, free of contaminants and oily or peeling coatings of paint of lacquer. Apply with brush, roller or coating pistol at t + 5 to + 30 degrees. When applied, clean the tool. Drying time is less than 6 hours. Intermediate drying of layers for 60 minutes.

Composition
Treated water, latex dispersion, titanium dioxide, finely dispersed filler, modifying and antiseptic supplements.
Base color: White

For painting of dry rooms. Packaging options: 14 kg, 7 kg, 3 kg

Base
Concrete, cement and lime plaster, brick, gypsum board, wood. To obtain a more durable and lasting coating, as well as to reduce paint consumption, it is recommended to flatten the base with a «SinPro» primer.

Flow rate
125-170 gr/sq.m. per layer depending on the state and structure of the surface.

Method of application
Mix thoroughly before use, dilute with water if necessary, but not more than 5% of the paint weight. The surface must be dry, stable, free of contaminants and oily or peeling coatings of paint of lacquer. Apply with brush, roller or coating pistol at t + 5 to + 30 degrees. When applied, clean the tool. Drying time is less than 6 hours. Intermediate drying of layers for 60 minutes.

Composition
Treated water, latex dispersion, titanium dioxide, finely dispersed filler, modifying and antiseptic supplements.
Base color: White

For painting of dry rooms. Packaging options: 14 kg, 7 kg, 3 kg

Base
Concrete, cement and lime plaster, brick, gypsum board, wood. To obtain a more durable and lasting coating, as well as to reduce paint consumption, it is recommended to flatten the base with a «SinPro» primer.

Flow rate
125-170 gr/sq.m. per layer depending on the state and structure of the surface.

Method of application
Mix thoroughly before use, dilute with water if necessary, but not more than 5% of the paint weight. The surface must be dry, stable, free of contaminants and oily or peeling coatings of paint of lacquer. Apply with brush, roller or coating pistol at t + 5 to + 30 degrees. When applied, clean the tool. Drying time is less than 6 hours. Intermediate drying of layers for 60 minutes.

Composition
Treated water, latex dispersion, titanium dioxide, finely dispersed filler, modifying and antiseptic supplements.
Base color: White

Deep penetration Coating
Specialized acrylic-based adhesive primer.

Packaging options
1,5 kg - 105 rub/

3 kg - 270 rub.
7 kg - 585 rub.
14 kg - 1,140 rub.

Base
Cast-in-situ concrete, concrete ceilings and blocks, gypsum plasterboard, brick and wood.

Method of application
For external and internal works. With the help of concrete bonding agent, surfaces with low moisture-absorbing capacity are treated: monolithic concrete, concrete ceilings and blocks, after which any plaster can be applied to it: lime, cement or gypsum.

Pre-treatment with concrete bonding agent of gypsum boards before application of any coating significantly strengthens them. Diluted with water. Odorless. Environmentally friendly product; does not contain solvents.

Long reach Primer
Antibacterial protection against mold. For external and internal works.

Packaging options
5 kg - 190 rub.
10 kg - 340 rub.

Base
Primer is intended for treatment of concrete, brick, plastered surfaces, gypsum plasterboard and chip board before painting, tiling and putting on wallpaper.

Long reach Primer
Antibacterial protection against mold. For external and internal works.

Packaging options
5 kg - 340 rub.
10 kg - 675 rub.

Application
Primer is intended for treatment of concrete, brick, plastered surfaces, gypsum plasterboard and flake board before painting, tiling and putting on wallpapers.